Skip to main content
Geosciences LibreTexts

6: National Spatial Data Infrastructure I

  • Page ID
    8172
  • \( \newcommand{\vecs}[1]{\overset { \scriptstyle \rightharpoonup} {\mathbf{#1}} } \) \( \newcommand{\vecd}[1]{\overset{-\!-\!\rightharpoonup}{\vphantom{a}\smash {#1}}} \)\(\newcommand{\id}{\mathrm{id}}\) \( \newcommand{\Span}{\mathrm{span}}\) \( \newcommand{\kernel}{\mathrm{null}\,}\) \( \newcommand{\range}{\mathrm{range}\,}\) \( \newcommand{\RealPart}{\mathrm{Re}}\) \( \newcommand{\ImaginaryPart}{\mathrm{Im}}\) \( \newcommand{\Argument}{\mathrm{Arg}}\) \( \newcommand{\norm}[1]{\| #1 \|}\) \( \newcommand{\inner}[2]{\langle #1, #2 \rangle}\) \( \newcommand{\Span}{\mathrm{span}}\) \(\newcommand{\id}{\mathrm{id}}\) \( \newcommand{\Span}{\mathrm{span}}\) \( \newcommand{\kernel}{\mathrm{null}\,}\) \( \newcommand{\range}{\mathrm{range}\,}\) \( \newcommand{\RealPart}{\mathrm{Re}}\) \( \newcommand{\ImaginaryPart}{\mathrm{Im}}\) \( \newcommand{\Argument}{\mathrm{Arg}}\) \( \newcommand{\norm}[1]{\| #1 \|}\) \( \newcommand{\inner}[2]{\langle #1, #2 \rangle}\) \( \newcommand{\Span}{\mathrm{span}}\)\(\newcommand{\AA}{\unicode[.8,0]{x212B}}\)

    National Spatial Data Infrastructure I

    David DiBiase

    6.1. Overview

    Chapters 6 and 7 consider the origins and characteristics of the framework data themes that make up the United States’ proposed National Spatial Data Infrastructure (NSDI). The seven themes include geodetic control, orthoimagery, elevation, transportation, hydrography, government units (administrative boundaries), and cadastral (property boundaries). Most framework data, like the printed topographic maps that preceded them, are derived directly or indirectly from aerial imagery. Chapter 6 introduces the field of photogrammetry, which is concerned with the production of geographic data from aerial imagery. The chapter begins by considering the nature and status of the U.S. NSDI in comparison with other national mapping programs. It considers the origins and characteristics of the geodetic control and orthoimagery themes. The remaining five themes are the subject of Chapter 7.

    Objectives

    Students who successfully complete Chapter 6 should be able to:

    1. Explain how the distribution of authority for mapping and land title registration among various levels of government affects the availability of framework data;
    2. Describe how topographic data are compiled from aerial imagery;
    3. Explain the difference between a vertical aerial photograph and an orthoimage;
    4. List and describe characteristics and status of the USGS National Map; and
    5. Discuss the relationship between the National Map and the NSDI framework.

    Comments and Questions

    Registered students are welcome to post comments, questions, and replies to questions about the text. Particularly welcome are anecdotes that relate the chapter text to your personal or professional experience. In addition, there are discussion forums available in the ANGEL course management system for comments and questions about topics that you may not wish to share with the whole world.

    To post a comment, scroll down to the text box under “Post new comment” and begin typing in the text box, or you can choose to reply to an existing thread. When you are finished typing, click on either the “Preview” or “Save” button (Save will actually submit your comment). Once your comment is posted, you will be able to edit or delete it as needed. In addition, you will be able to reply to other posts at any time.

    Note: the first few words of each comment become its “title” in the thread.

    6.2. Checklist

    The following checklist is for Penn State students who are registered for classes in which this text, and associated quizzes and projects in the ANGEL course management system, have been assigned. You may find it useful to print this page out first so that you can follow along with the directions.

    Chapter 6 Checklist (for registered students only)
    Step Activity Access/Directions
    1 Read Chapter 6 This is the second page of the Chapter. Click on the links at the bottom of the page to continue or to return to the previous page, or to go to the top of the chapter. You can also navigate the text via the links in the GEOG 482 menu on the left.
    2 Submit two practice quizzes including:
    • National Spatial Data Legacies
    • Photogrammetry

    Practice quizzes are not graded and may be submitted more than once.

    Go to ANGEL > [your course section] > Lessons tab > Chapter 6 folder > [quiz]
    3 Perform “Try this” activities including:
    • Compare data copyright policies of the U.S. and Britain
    • Search for USGS topographic maps and aerial imagery
    • View and explore a digitally scanned topographic map
    • View and explore a digital orthophoto
    • Assess the availability of digital orthophotos for your area

    “Try this” activities are not graded.

    Instructions are provided for each activity.
    4 Submit the Chapter 6 Graded Quiz ANGEL > [your course section] > Lessons tab > Chapter 6 folder > Chapter 6 Graded Quiz. See the Calendar tab in ANGEL for due dates.
    5 Read comments and questionsposted by fellow students. Add comments and questions of your own, if any. Comments and questions may be posted on any page of the text, or in a Chapter-specific discussion forum in ANGEL.

    6.3. National Geographic Information Strategies

    In 1998 Ian Masser published a comparative study of the national geographic information strategies of four developed countries: Britain (England and Wales), the Netherlands, Australia, and the U.S. Masser built upon earlier work which found that countries with relatively low levels of digital data availability and GIS diffusion also tended to be countries where there had been a fragmentation of data sources in the absence of central or local government coordination” (p. ix). Comparing his four case studies in relation to the seven framework themes identified for the U.S. NSDI, Masser found considerable differences in data availability, pricing, and intellectual property protections. Differences in availability of core data, he found, are explained by the ways in which responsibilities for mapping and for land titles registration are distributed among national, state, and local governments in each country.

    The following table summarizes those distributions of responsibilities.

    Distributions of Responsibilities
    Britain (England & Wales) Netherlands Australia United States
    Central government Land titles registration, small- and large-scale mapping, statistical data Land titles registration, small- and large-scale mapping, statistical data Some small-scale mapping, statistical data Small-scale mapping, statistical data
    State/Territorial government Not applicable Not applicable Land titles registration, small- and large-scale mapping Some land titles registration and small- and large-scale mapping
    Local government None large-scale mapping, population registers Some large-scale mapping Land titles registration, large-scale mapping

    Distribution of responsibilities among different levels of government (Masser, 1998).

    Masser’s analysis helps to explain what geospatial professionals in the U.S. have known all along — that the coverage of framework data in the U.S. is incomplete or fragmented because thousands of local governments are responsible for large-scale mapping and land titles registration, and because these activities tend to be poorly coordinated. In contrast, core data coverage is more or less complete in Australia, the Netherlands, and Britain, where central and state governments have authority over large-scale mapping and land-titles registration.

    Other differences among the four countries relate to fees charged by governments to use the geographic and statistical data they produce, as well as the copyright protections they assert over the data. U.S. federal government agencies, Masser notes, differ from their counterparts by charging no more than the cost of reproducing their data in forms suitable for delivery to customers. State and local government policies in the U.S. vary considerably, however. Longstanding debates persist in the U.S. about the viability and ethics of recouping costs associated with public data.

    The U.S. also differs starkly from Britain and Australia in regards to copyright protection. Most data published by the U.S. Geological Survey or U.S. Census Bureau resides in the public domain and may be used without restriction. U.K. Ordnance Survey data, by contrast, is protected by Crown copyright, and is available for use by others for fees and under the terms of restrictive licensing agreements. One consequence of the federal government’s decision to release its geospatial data to the public domain, some have argued, was the early emergence of a vigorous geospatial industry in the U.S.

    TRY THIS!

    To learn more about the Crown copyright policy of the Great Britain’s Ordnance Survey, search the Internet for “ordnance survey crown copyright.”

    The USGS policy is explained here (or search on “acknowledging usgs as information source”)

    6.4. Legacy Data: USGS Topographic Maps

    Since the eighteenth century, the preparation of a detailed basic reference map has been recognized by the governments of most countries as fundamental for the delimitation of their territory, for underpinning their national defense and for management of their resources (Parry, 1987).

    Specialists in geographic information recognize two broad functional classes of maps, reference maps and thematic maps. As you recall from Chapter 3, a thematic map is usually made with one particular purpose in mind. Often, the intent is to make a point about the spatial pattern of a single phenomenon. Reference maps, on the other hand, are designed to serve many different purposes. Like a reference book, such as a dictionary, encyclopedia, or gazetteer, reference maps help people look up facts. Common uses of reference maps include locating place names and features, estimating distances, directions, and areas, and determining preferred routes from starting points to a destination. Reference maps are also used as base maps upon which additional geographic data can be compiled. Because reference maps serve various uses, they typically include a greater number and variety of symbols and names than thematic maps. The portion of the United States Geological Survey (USGS) topographic map shown below is a good example.

    Portion of USGS 7.5-minute topographic map for Bellefonte PA

    A typical reference map. A portion of a USGS topographic quadrangle map (USGS, 1971)

    The term topography derives from the Greek topographein, “to describe a place.” Topographic maps show, and name, many of the visible characteristics of the landscape, as well as political and administrative boundaries. Topographic map series provide base maps of uniform scale, content, and accuracy (more or less) for entire territories. Many national governments include agencies responsible for developing and maintaining topographic map series for a variety of uses, from natural resource management to national defense. Affluent countries, countries with especially valuable natural resources, and countries with large or unusually active militaries, tend to be mapped more completely than others.

    The systematic mapping of the entire U.S. began in 1879, when the U.S. Geological Survey (USGS) was established. Over the next century USGS and its partners created topographic map series at several scales, including 1:250,000, 1:100,000, 1:63,360, and 1:24,000. The diagram below illustrates the relative extents of the different map series. Since much of today’s digital map data was digitized from these topographic maps, one of the challenges of creating continuous digital coverage of the entire U.S. is to seam together all of these separate map sheets.

    Diagam illustrating scales of various USGS topographic map series

    Relative extents of the several USGS quadrangle map series. (Thompson, 1988).

    Map sheets in the 1:24,000-scale series are known as quadrangles or simply quads. A quadrangle is a four-sided polygon. Although each 1:24,000 quad covers 7.5 minutes longitude by 7.5 minutes latitude, their shapes and area coverage vary. The area covered by the 7.5-minute maps varies from 49 to 71 square miles (126 to 183 square kilometers), because the length of a degree of longitude varies with latitude.

    Topographer compiling map using alidade and plane table

    Topographer compiling topographic map using a plane table and alidade (NOAA, 2007).

    Through the 1940s, topographers in the field compiled by hand the data depicted on topographic maps. Anson (2002) recalls being outfitted with a 14 inch x 14 inch tracing table and tripod, plus an alidade [a 12 inch telescope mounted on a brass ruler], a 13 foot folding stadia rod, a machete, and a canteen… (p. 1). Teams of topographers sketched streams, shorelines, and other water features; roads, structures, and other features of the built environment; elevation contours, and many other features. To ensure geometric accuracy, their sketches were based upon geodetic control provided by land surveyors, as well as positions and spot elevations they surveyed themselves using alidades and rods. Depending on the terrain, a single 7.5-minute quad sheet might take weeks or months to compile. In the 1950s, however, photogrammetric methodsinvolving stereoplotters that permitted topographers to make accurate stereoscopic measurements directly from overlapping pairs of aerial photographs provided a viable and more efficient alternative to field mapping. We’ll consider photogrammetry in greater detail later on in this chapter.

    By 1992 the series of over 53,000 separate quadrangle maps covering the lower 48 states, Hawaii, and U.S. territories at 1:24,000 scale was completed, at an estimated total cost of $2 billion. However, by the end of the century the average age of 7.5-minute quadrangles was over 20 years, and federal budget appropriations limited revisions to only 1,500 quads a year (Moore, 2000). As landscape change has exceeded revisions in many areas of the U.S., the USGS topographic map series has become legacy data outdated in terms of format as well as content.

    TRY THIS!

    Search the Internet on “USGS topographic maps” to investigate the history and characteristics of USGS topographic maps in greater depth. View preview images, look up publication and revision dates, and order topographic maps at “USGS Store.”

    6.5. Accuracy Standards

    Errors and uncertainty are inherent in geographic data. Despite the best efforts of the USGS Mapping Division and its contractors, topographic maps include features that are out of place, features that are named or symbolized incorrectly, and features that are out of date.

    As discussed in Chapter 2, the locational accuracy of spatial features encoded in USGS topographic maps and data are guaranteed to conform to National Map Accuracy Standards. The standard for topographic maps state that horizontal positions of 90 percent of the well-defined points tested will occur within 0.02 inches (map distance) of their actual positions. Similarly, the vertical positions of 90 percent of well-defined points tested are to be true to within one-half of the contour interval. Both standards, remember, are scale-dependent.

    Objective standards do not exist for the accuracy of attributes associated with geographic features. Attribute errors certainly do occur, however. A chronicler of the national mapping program (Thompson, 1988, p. 106) recalls a worried user who complained to USGS that “My faith in map accuracy received a jolt when I noted that on the map the borough water reservoir is shown as a sewage treatment plant.”

    The passage of time is perhaps the most troublesome source of errors on topographic maps. As mentioned in the previous page, the average age of USGS topographic maps is over 20 years. Geographic data quickly lose value (except for historical analyses) unless they are continually revised. The sequence of map fragments below shows how frequently revisions were required between 1949 and 1973 for the quad that covers Key Largo, Florida. Revisions are based primarily on geographic data produced by aerial photography.

    Geographic data quickly lose value if they are not kept up to date. (Thompson, 1988). Select each of the years to view the revised map. Note: You need to have the Adobe Flash player installed in order to see and interact with this illustration. You can download Flash Player free athttp://www.adobe.com/flash.

    TRY THIS!

    Investigate standards for data quality and other characteristics of U.S. national map data here or by searching the Internet for “usgs national map accuracy standards”

    6.6. Scanned Topographic Maps

    Many digital data products have been derived from the USGS topographic map series. The simplest of such products are Digital Raster Graphics(DRGs). DRGs are scanned raster images of USGS 1:24,000 topographic maps. DRGs are useful as backdrops over which other digital data may be superimposed. For example, the accuracy of a vector file containing lines that represent lakes, rivers, and streams could be checked for completeness and accuracy by plotting it over a DRG.

    Digital Raster Graphic for Bushkill PA

    Portion of a Digital Raster Graphic (DRG) for Bushkill, PA

    DRGs are created by scanning paper maps at 250 pixels per inch resolution. Since at 1:24,000 1 inch on the map represents 2,000 feet on the ground, each DRG pixel corresponds to an area about 8 feet (2.4 meters) on a side. Each pixel is associated with a single attribute: a number from 0 to 12. The numbers stand for the 13 standard DRG colors.

    Maginified view of Digital Raster Graphic

    Magnified portion of a Digital Raster Graphic (DRG) for Bushkill, PA

    Like the paper maps from which they are scanned, DRGs comply withNational Map Accuracy Standards. A subset of the more than 50,000 DRGs that cover the lower 48 states have been sampled and tested for completeness and positional accuracy.

    DRGs conform to the Universal Transverse Mercator projection used in the local UTM zone. The scanned images are transformed to the UTM projection by matching the positions of 16 control points. Like topographic quadrangle maps, all DRGs within one UTM zone can be fit together to form a mosaic after the map “collars” are removed.

    To investigate DRGs in greater depth, visit the USGS Topomaps website or search the Internet on “USGS Digital Raster Graphics”

    TRY THIS!

    EXPLORE A DRG WITH GLOBAL MAPPER (DLGV32 PRO)

    You can use a free software application called Global Mapper (also known as dlgv32 Pro) to investigate the characteristics of a USGS Digital Raster Graphic. Originally developed by the staff of the USGS Mapping Division at Rolla, Missouri as a data viewer for USGS data, Global Mapper has since been commercialized, but is available in a free trial version. The instructions below will guide you through the process of installing the software and opening the DRG data. Penn State students will later be asked questions that will require you to explore the data for answers.
    Note: Global Mapper is a Windows application and will not run under the Macintosh operating system. The questions asked of Penn State students that involve the use of Global Mapper are not graded.

    GLOBAL MAPPER (DLGV32 PRO) INSTALLATION INSTRUCTIONS

    Skip this step if you already downloaded and installed Global Mapper or dlgv32 Pro.

    1. Navigate to globalmapper.com or search the Internet for “Global Mapper” or “dlgv32 Pro”
    2. Download the trial version of the software.
    3. Double-click on the setup file you downloaded to install the program.
    4. Launch Global Mapper or dlgv32 Pro.

    DOWNLOADING AND EXPLORING DRG DATA IN GLOBAL MAPPER

    1. First, create a directory called “USGS Data” on your hard disk, where you can file your course materials if you haven’t done so already.
    2. Download the DRG.zip data archive. The ZIP archive is 2.7 Mb in size and will take approximately 35 seconds to download via high speed DSL or cable, or about 9 minutes and 35 seconds minutes via 56 Kbps modem. Registered Penn State students who cannot download the file should contact their assigned teaching assistant for help.
    3. Now decompress the archive into a directory on your hard disk.
      • Open the ZIP archive you downloaded.
      • Extract all files in the ZIP archive into a known subdirectory.

    The result will be five files that make up one Digital Raster Graphic.

    1. Open your DRG in Global Mapper
      • Choose File > Open Data File(s)…, then navigate to the subdirectory into which you extracted the DRG files.
      • Open the file ‘bushkill_pa.tif’

    The DRG data correspond with the 7.5 minute quadrangle for Bushkill, PA.

    1. Notice that as you glide the magnifying glass cursor over the DRG, the UTM (NAD 27) and geographic coordinates of the cursor’s position change in the lower right-hand corner of the window. This tells you that the DRG is in fact georeferenced.
    2. Experiment with Global Mapper’s tools. Use the Zoom and Pan tools to magnify and scroll across the DRG. The Full View button (the one with the house icon) refreshes the initial full view of the data set.
    3. The Measure tool (ruler icon) allows you to not only measure distance as the crow flies, but also to see the area enclosed by a series of line segments drawn by repeated mouse clicks. Note again the location information that is given to you near the bottom of the application window.

    Certain tools, e.g., the 3D Path Profile/Line of Sight tool are not functional in the free (unregistered) version of Global Mapper.

    1. To view an excerpt from the DRG metadata, navigate to Tools > Control Center, then click the Metadata button.

    6.7. Federal Geographic Data Committee

    Even before the USGS completed its nationwide 7.5-minute quadrangle series, the U.S. federal government had begun to rethink and reorganize its national mapping program. In 1990 the U.S. Office of Management and Budget issued Circular A-16, which established the Federal Geographic Data Committee (FGDC) as the interagency coordinating body responsible for facilitating cooperation among federal agencies whose missions include producing and using geospatial data. FGDC is chaired by the Department of Interior, and is administered by USGS.

    In 1994 President Bill Clinton’s Executive Order 12906 charged the FGDC with coordinating the efforts of government agencies and private sector firms leading to a National Spatial Data Infrastructure (NSDI). The Order defined NSDI as “the technology, policies, standards and human resources necessary to acquire, process, store, distribute, and improve utilization of geospatial data” (White House, 1994). It called upon FGDC to establish a National Geospatial Data Clearinghouse, ordered federal agencies to make their geospatial data products available to the public through the Clearinghouse, and required them to document data in a standard format that facilitates Internet search. Agencies were required to produce and distribute data in compliance with standards established by FGDC. (The Departments of Defense and Energy were exempt from the order, as was the Central Intelligence Agency.)

    Finally, the Order charged FGDC with preparing an implementation plan for a National Digital Geospatial Data Framework, the “data backbone of the NSDI” (FGDC, 1997, p. v). The seven core data themes that comprise the NSDI Framework are listed below, along with the government agencies that have lead responsibility for creating and maintaining each theme. Later on in this chapter, and in the one that follows, we’ll investigate the framework themes one by one.

    NSDI Framework
    Geodetic Control Department of Commerce, National Oceanographic and Atmospheric Administration, National Geodetic Survey
    Orthoimagery Department of Interior, U.S. Geological Survey
    Elevation Department of Interior, U.S. Geological Survey
    Transportation Department of Transportation
    Hydrography Department of Interior, U.S. Geological Survey
    Administrative units (boundaries) Department of Commerce, U.S. Census Bureau
    Cadastral Department of Interior, Bureau of Land Management

    Seven data themes that comprise the NSDI Framework and the government agencies responsible for each.

    6.8. USGS National Map

    Executive Order 12906 decreed that a designee of the Secretary of the Department of Interior would chair the Federal Geographic Data Committee. The USGS, an agency of the Department of Interior, has lead responsibility for three of the seven NSDI framework themes–orthoimagery, elevation, and hydrography, and secondary responsibility for several others. In 2001, USGS announced its vision of a National Map that “aligns with the goals of, and is one of several USGS activities that contribute to, the National Spatial Data Infrastructure” (USGS, 2001, p. 31). A 2002 report of the National Research Council identified the National Map as the most important initiative of USGS’ Geography Discipline at the USGS (NRC, 2002). Recognizing its unifying role across its science disciplines, USGS moved management responsibility for the National Map from Geography to the USGS Geospatial Information Office in 2004. (One reason that the term “geospatial” is used at USGS and elsewhere is to avoid association of GIS with a particular discipline, i.e. Geography.)

    In 2001, USGS envisioned the National Map as the Nation’s topographic map for the 21st Century (USGS, 2001, p.1). Improvements over the original topographic map series were to include:

    Characteristics of the National Map
    Currentness Content will be updated on the basis of changes in the landscape instead of the cyclical inspection and revisions cycles now in use [for printed topographic map series]. The ultimate goal is that new content be incorporated with seven days of a change in the landscape.
    Seamlessness Features will be represented in their entirety and not interrupted by arbitrary edges, such as 7.5-minute map boundaries.
    Consistent classification Types of features, such as “road” and “lake/pond,” will be identified in the same way throughout the Nation.
    Variable resolution Data resolution, or pixel size, may vary among imagery of urban, rural, and wilderness areas. The resolution of elevation data may be finer for flood plain, coastal, and other areas of low relief than for areas of high relief.
    Completeness Data content will include all mappable features (as defined by the applicable content standards for each data theme and source).
    Consistency and integration Content will be delineated geographically (that is, in its true ground position within the applicable accuracy limit) to ensure logical consistency between related features. For example, … streams and rivers [should] consistently flow downhill…
    Variable positional accuracy The minimum positional accuracy will be that of the current primary topographic map series for an area. Actual positional accuracy will be reported in conformance with the Federal Geographic Data Committee’s Geospatial Positioning Accuracy Standard.
    Spatial reference systems Tools will be provided to integrate data that are mapping using different datums and referenced to different coordinates systems, and to reproject data to meet user requirements.
    Standardized content …will conform to appropriate Federal Geographic Data Committee, other national, and/or international standards.
    Metadata At a minimum, metadata will meet Federal Geographic Data Committee standards to document … [data] lineage, positional and attribute accuracy, completeness, and consistency.

    Characteristics of the National Map (USGS, 2001, p. 11-13.)

    As of 2008, USGS’ ambitious vision has not yet been fully realized.Insofar as it depends upon cooperation by many federal, state and local government agencies, the vision may never be fully achieved. Still, elements of a National Map do exist, including national data themes, data access and dissemination technologies such as the Geospatial One Stop portal and the National Map viewer, and the U.S. National Atlas. A new Center of Excellence for Geospatial Information Science (CEGIS) has been established under the USGS Geospatial Information Office to undertake the basic GIScience research needed to devise and implement advanced tools that will make the National Map more valuable to end users.

    The data themes included in the National Map are shown in the following table, in comparison to the NSDI framework themes outlined earlier in this chapter. As you see, the National Map themes align with five of the seven framework themes, but do not include geodetic control and cadastral data. Also, the National Map adds land cover and geographic names, which are not included among the NSDI framework themes. Given USGS’ leadership role in FGDC, why do the National Map themes deviate from the NSDI framework? According to the Committee on Research Priorities for the USGS Center of Excellence for Geospatial Science, “these themes were selected because USGS is authorized to provide them if no other sources are available, and [because] they typically comprise the information portrayed on USGS topographic maps (NRC, 2007, p. 31).

    Data Themes
    National Map Themes NSDI Framework Themes
    Geodetic Control No Yes
    Orthoimagery Yes Yes
    Land Cover Yes No
    Elevation Yes Yes
    Transportation Yes Yes
    Hydrography Yes Yes
    Boundaries Yes Yes
    Structures Yes No
    Cadastral No Yes
    Geographic Names Yes No

    Comparison of data themes included in the National Map and NSDI framework.

    The following sections of this chapter, and the one that follows, will describe the derivation, characteristics, and status of the seven NSDI themes in relation to the National Map. Chapter 8, Remotely Sensed Image Data, will include a description of the National Land Cover Data program that provides the land cover theme of the National Map. Registered students used the USGS Geographic Information Names Information System for a project assignment.

    6.9. Theme: Geodetic Control

    In the U.S. the National Geodetic Survey (NGS) maintains a national geodetic control network called the National Spatial Reference System (NSRS). The NSRS includes approximately 300,000 horizontal and 600,000 vertical control points (Doyle, 1994). High-accuracy control networks are needed for mapping projects that span large areas; to design and maintain interstate transportation corridors including highways, pipelines, and transmission lines; and to monitor tectonic movements of the Earth’s crust and sea level changes, among other applications (FGDC, 1998a).

    Some control points are more accurate than others, depending on the methods surveyors used to establish them. The Chapter 5 page titled “Survey Control” outlines the accuracy classification adopted in 1988 for control points in the NSRS. As geodetic-grade GPS technology has become affordable for surveyors, expectations for control network accuracy have increased. In 1998, the FGDC’s Federal Geodetic Control Subcommittee published a set of Geospatial Positioning Accuracy Standards. One of these is the Standards for Geodetic Networks (FGDC, 1998a). The table below presents the latest accuracy classification for horizontal coordinates and heights (ellipsoidal and orthometric). For example, the theoretically infinitesimal location of a horizontal control point classified as “1-Millimeter” must have a 95% likelihood of falling within a 1 mm “radius of uncertainty” (FGDC, 1998b, 1-5).

    Accuracy Classifications
    Accuracy Classification Radius of Uncertainty (95% confidence)
    1-Millimeter 0.001 meters
    2-Millimeter 0.002 meters
    5-Millimeter 0.005 meters
    1-Centimeter 0.010 meters
    2-Centimeter 0.020 meters
    5-Centimeter 0.050 meters
    1-Decimeter 0.100 meters
    2-Decimeter 0.200 meters
    5-Decimeter 0.500 meters
    1-Meter 1.000 meters
    2-Meter 2.000 meters
    5-Meter 5.000 meters
    10-Meter 10.000 meters

    Accuracy classification for geodetic control networks (FGDC, 1998).

    If in Chapter 2 you retrieved a NGS datasheet for a control point, you probably found that the accuracy of your point was reported in terms of the 1988 classification. If yours was a “first order” (C) control point, its accuracy classification is 1 centimeter. NGS does plan to upgrade the NSRS, however. Its 10-year strategic plan states that “the geodetic latitude, longitude and height of points used in defining NSRS should have an absolute accuracy of 1 millimeter at any time” (NGS, 2007, 8).

    THINK ABOUT IT

    Why does the 1998 standard refer to absolute accuracies while the 1988 standard (outlined in Chapter 5) is defined in terms of maximum error relative to distance between two survey points? What changed between 1988 and 1998 in regard to how control points are established?

    PRACTICE QUIZ

    Registered Penn State students should return now to the Chapter 6 folder in ANGEL (via the Resources menu to the left) to take a self-assessment quiz about National Spatial Data Legacies. You may take practice quizzes as many times as you wish. They are not scored and do not affect your grade in any way.

    6.10. Theme: Orthoimagery

    The Federal Geographic Data Committee (FGDC, 1997, p. 18) definesorthoimage as “a georeferenced image prepared from an aerial photograph or other remotely sensed data … [that] has the same metric properties as a map and has a uniform scale.” Unlike orthoimages, the scale of ordinary aerial images varies across the image, due to the changing elevation of the terrain surface (among other things). The process of creating an orthoimage from an ordinary aerial image is called orthorectification. Photogrammetrists are the professionals who specialize in creating orthorectified aerial imagery, and in compiling geometrically-accurate vector data from aerial images. So, to appreciate the requirements of the orthoimagery theme of the NSDI framework, we first need to investigate the field of photogrammetry.

    6.11. Photogrammetry

    Photogrammetry is a profession concerned with producing precise measurements of objects from photographs and photoimagery. One of the objects measured most often by photogrammetrists is the surface of the Earth. Since the mid-20th century, aerial images have been the primary source of data used by USGS and similar agencies to create and revise topographic maps. Before then, topographic maps were compiled in the field using magnetic compasses, tapes, plane tables (a drawing board mounted on a tripod, equipped with an leveling telescope like a transit), and even barometers to estimate elevation from changes in air pressure. Although field surveys continue to be important for establishing horizontal and vertical control, photogrammetry has greatly improved the efficiency and quality of topographic mapping.

    A straight line between the center of a lens and the center of a visible scene is called an optical axis. A vertical aerial photograph is a picture of the Earth’s surface taken from above with a camera oriented such that its optical axis is vertical. In other words, when a vertical aerial photograph is exposed to the light reflected from the Earth’s surface, the sheet of photographic film (or an digital imaging surface) is parallel to the ground. In contrast, an image you might create by snapping a picture of the ground below while traveling in an airplane is called an oblique aerial photograph, because the camera’s optical axis forms an oblique angle with the ground.

    Aerial photograph

    A vertical aerial photograph (National Aerial Photography Program, June 28, 1994).

    The nominal scale of a vertical air photo is equivalent to f / H, where f is the focal length of the camera (the distance between the camera lens and the film — usually six inches), and H is the flying height of the aircraft above the ground. It is possible to produce a vertical air photo such that scale is consistent throughout the image. This is only possible, however, if the terrain in the scene is absolutely flat. In rare cases where that condition is met, topographic maps can be compiled directly from vertical aerial photographs. Most often however, air photos of variable terrain need to be transformed, or rectified, before they can be used as a source for mapping.

    Government agencies at all levels need up-to-date aerial imagery. Early efforts to sponsor complete and recurring coverage of the U.S. included the National Aerial Photography Program, which replaced an earlier National High Altitude Photography program in 1987. NAPP was a consortium of federal government agencies that aimed to jointly sponsor vertical aerial photography of the entire lower 48 states every seven years or so at an altitude of 20,000 feet, suitable for producing topographic maps at scales as large as 1:5,000. More recently NAPP has been eclipsed by another consortium called the National Agricultural Imagery Program. According to student Anne O’Connor (personal communication, Spring 2004), who represented the Census Bureau in the consortium

    A large portion of the country is flown yearly in the NAIP program due to USDA compliance needs. One problem is that it is leaf on, therefore in areas of dense foliage, some features are obscured. NAIP imagery is produced using partnership funds from USDA, USGS, FEMA, BLM, USFS and individual states. Other partnerships (between agencies or an agency and state) are also developed depending upon agency and local needs.

    Aerial photography missions involve capturing sequences of overlapping images along many parallel flight paths. In the portion of the air photo mosaic shown below, note that the photographs overlap one another end to end, and side to side. This overlap is necessary for stereoscopic viewing, which is the key to rectifying photographs of variable terrain. It takes about 10 overlapping aerial photographs taken along two adjacent north-south flightpaths to provide stereo coverage for a 7.5-minute quadrangle.

    Mosaic of aerial photographs

    Portion of a mosaic of overlapping vertical aerial photographs. (United States Department of Agriculture, Commodity Stabilization Service, n.d.).

    TRY THIS!

    Use the USGS’ EarthExplorer (http://earthexplorer.usgs.gov/) to identify the vertical aerial photograph that shows the “populated place” in which you live. How old is the photo? (EarthExplorer is part of a USGS data distribution system.)

    Note: The Digital Orthophoto backdrop that EarthExplorer allows you to view is not the same as the NAPP photos the system allows you to identify and order. By the end of this lesson, you should know the difference! If you don’t, use the Chapter 6 Discussion Forum to ask.

    6.12. Perspective and Planimetry

    To understand why topographic maps can’t be traced directly off of most vertical aerial photographs, you first need to appreciate the difference between perspective and planimetry. In a perspective view, all light rays reflected from the Earth’s surface pass through a single point at the center of the camera lens. A planimetric (plan) view, by contrast, looks as though every position on the ground is being viewed from directly above. Scale varies in perspective views. In plan views, scale is everywhere consistent (if we overlook variations in small-scale maps due to map projections). Topographic maps are said to be planimetrically correct. So are orthoimages. Vertical aerial photographs are not, unless they happen to be taken over flat terrain.

    As discussed above, the scale of an aerial photograph is partly a function of flying height. Thus, variations in elevation cause variations in scale on aerial photographs. Specifically, the higher the elevation of an object, the farther the object will be displaced from its actual position away from the principal point of the photograph (the point on the ground surface that is directly below the camera lens). Conversely, the lower the elevation of an object, the more it will be displaced toward the principal point. This effect, called relief displacement, is illustrated in the diagram below. Note that the effect increases with distance from the principal point.

    Diagram illustrating how objects are displaced in aerial photographs due to variations in terrain elevation

    Relief displacement is scale variation on aerial photographs caused by variations in terrain elevation.

    At the top of the diagram above, light rays reflected from the surface converge upon a single point at the center of the camera lens. The smaller trapezoid below the lens represents a sheet of photographic film. (The film actually is located behind the lens, but since the geometry of the incident light is symmetrical, we can minimize the height of the diagram by showing a mirror image of the film below the lens.) Notice the four triangular fiducial marks along the edges of the film. The marks point to the principal point of the photograph, which corresponds with the location on the ground directly below the camera lens at the moment of exposure. Scale distortion is zero at the principal point. Other features shown in the photo may be displaced toward or away from the principal point, depending on the elevation of the terrain surface. The larger trapezoid represents the average elevation of the terrain surface within a scene. On the left side of the diagram, a point on the land surface at a higher than average elevation is displaced outwards, away from the principal point and its actual location. On the right side, another location at less than average elevation is displaced towards the principal point. As terrain elevation increases, flying height decreases and photo scale increases. As terrain elevation decreases, flying height increases and photo scale decreases.

    Compare the map and photograph below. Both show the same gas pipeline, which passes through hilly terrain. Note the deformation of the pipeline route in the photo relative to the shape of the route on the topographic map. The deformation in the photo is caused by relief displacement. The photo would not serve well on its own as a source for topographic mapping.

    A pipeline clearing appears crooked in an unrectified aerial image, but appears straight on a topogrpahic map

    The pipeline clearing appears crooked in the photograph because of relief displacement.

    Still confused? Think of it this way: where the terrain elevation is high, the ground is closer to the aerial camera, and the photo scale is a little larger than where the terrain elevation is lower. Although the altitude of the camera is constant, the effect of the undulating terrain is to zoom in and out. The effect of continuously-varying scale is to distort the geometry of the aerial photo. This effect is called relief displacement.

    Distorted perspective views can be transformed into plan views through a process called rectification. In a Discussion Forum posting during the Summer 2001 offering of this class, student Joel Hamilton recounted one very awkward way to rectify aerial photographs:

    “Back in the mid 80′s I saw a very large map being created from a multitude of aerial photos being fitted together. A problem that arose was that roads did not connect from one photo to the next at the outer edges of the map. No computers were used to create this map. So using a little water to wet the photos on the outside of the map, the photos were streched to correct for the distortions. Starting from the center of the map the mosaic map was created. A very messy process.”

    Nowadays, digital aerial photographs can be rectified in an analogous (but much less messy) way, using specialized photogrammetric software that shifts image pixels toward or away from the principal point of each photo in proportion to two variables: the elevation of the point of the Earth’s surface at the location that corresponds to each pixel, and each pixel’s distance from the principal point of the photo.

    Another even simpler way to rectify perspective images is to view pairs of images stereoscopically.

    6.13. Stereoscopy

    If you have normal or corrected vision in both eyes, your view of the world is stereoscopic. Viewing your environment simultaneously from two slightly different perspectives enables you to estimate very accurately which objects in your visual field are nearer, and which are farther away. You know this ability as depth perception.

    When you fix your gaze upon an object, the intersection of your two optical axes at the object form what is called a parallactic angle. On average, people can detect changes as small as 3 seconds in the parallactic angle, an angular resolution that compares well to transits and theodolites. The keenness of human depth perception is what makes photogrammetric measurements possible.

    Your perception of a three-dimensional environment is produced from two separate two-dimensional images. The images produced by your eyes are analogous to two aerial images taken one after another along a flight path. Objects that appear in the area of overlap between two aerial images are seen from two different perspectives. A pair of overlapping vertical aerial images is called a stereopair. When a stereopair is viewed such that each eye sees only one image, it is possible to envision a three-dimensional image of the area of overlap.

    In the following page you’ll find a couple of examples of how stereoscopy is used to create planimetrically-correct views of the Earth’s surface. If you have anaglyph stereo (red/blue) glasses, you’ll be able to see stereo yourself. First, let’s practice viewing anaglyph stereo images.

    TRY THIS!

    One way to see in stereo is with an instrument called a stereoscope (see examples at James Madison University’s Spatial Information Clearinghouse). Another way that works on computer screens and doesn’t require expensive equipment is called anaglyph stereo (anaglyph comes from a Greek word that means, “to carve in relief”). The anaglyph method involves special glasses in which the left and right eyes are covered by blue and red filters. CPGIS/MGIS registered through the World Campus received anaglyph glasses along with your welcome letters. Penn State students registered at University Park or other campuses should contact their instructor to determine if glasses are available.

    The anaglyph image shown below consists of a superimposed stereopair in which the left image is shown in red, and the right image is shown in green and blue. The filters in the glasses ensure the each eye sees only one image. Can you make out the three-dimensional image of the U-shaped valley formed by glaciers in the French Alps?

    Anaglyph stereo image of French Alps

    Anaglyph stereopair by Pierre Gidon showing a scene in the French Alps (the image is used by permission of the author). Requires red/blue glasses.

    How about this one: a panorama of the surface of Mars imaged during the Pathfinder mission, July 1997?

    Anaglyph stereo image of the surface of Mars

    (NASA, 1997). Image processing and mosaic by Tim Parker.

    To find other stereo images on the World Wide Web, search on “anaglyph.”

    6.14. Rectification by Stereoscopy

    Aerial images need to be transformed from perspective views into plan views before they can be used to trace the features that appear on topographic maps, or to digitize vector features in digital data sets. One way to accomplish the transformation is through stereoscopic viewing.

    Below are portions of a vertical aerial photograph and a topographic map that show the same area, a synclinal ridge called “Little Mountain” on the Susquehanna River in central Pennsylvania. A linear clearing, cut for a power line, appears on both (highlighted in yellow on the map). The clearing appears crooked on the photograph due to relief displacement. Yet we know that an aerial image like this one was used to compile the topographic map. The air photo had to have been rectified to be used as a source for topographic mapping.

    Comparison of topographic map and unrectified aerial image

    The deformation of the powerline clearing shown in the air photo is caused by relief displacement. (USGS. “Harrisburg East Quadrangle, Pennsylvania”)

    Below are portions of two aerial photographs showing Little Mountain. The two photos were taken from successive flight paths. The two perspectives can be used to create a stereopair.

    Two aerial images that make up a stereopair

    A stereopair: two air photos of the same area taken from different points of view.

    Next, the stereopair is superimposed in an anaglyph image. Using your red/blue glasses, you should be able to see a three-dimensional image of Little Mountain in which the power line appears straight, as it would if you were able to see it in person. Notice that the height of Little Mountain is exaggerated due to the fact that the distance between the principal points of the two photos is not exactly proportional to the distance between your eyes.

    Anaglyph stereo image created from stereopair

    An anaglyph (red/blue) stereo image that fuses the stereopair shown in the above figure. When viewed with a red filter over the left eye and a cyan (blue) filter over the right eye, a sterescopic image is formed. Notice that the powerline clearing, which appears crooked in both air photos, appears straight in the stereoscopic image. (USGS. “Harrisburg East Quadrangle, Pennsylvania”)

    Let’s try that again. We need to make sure that you can visualize how stereoscopic viewing transforms overlapping aerial photographs from perspective views into planimetric views. The aerial photograph and topographic map portions below show the same features, a power line clearing crossing the Sinnemahoning Creek in Central Pennsylvania. The power line appears to bend as it descends to the creek because of relief displacement.

    Comparison of topographic map and unrectified aerial image

    The deformation of the powerline clearing shown in the air photo is caused by relief displacement. (USGS. “Keating Quadrangle, Pennsylvania”).

    Two aerial photographs of the same area taken from different perspectives constitute a stereo pair.

    Two aerial images that make up a stereopair

    A stereopair, two air photos of the same area taken from different points of view.

    By viewing the two photographs stereoscopically, we can transform them from two-dimensional perspective views to a single three-dimensional view in which the geometric distortions caused by relief displacement have been removed.

    Anaglyph stereo image created from stereopair

    Deformation caused by relief displacement is rectified when the air photos are viewed in stereo. (USGS. “Keating Quadrangle, Pennsylvania”).

    Photogrammetrists use instruments called stereoplotters to trace, orcompile, the data shown on topographic maps from stereoscopic images like the ones you’ve seen here. The operator pictured below is viewing a stereoscopic model similar to the one you see when you view the anaglyph stereo images with red/blue glasses. A stereopair is superimposed on the right-hand screen of the operator’s workstation. The left-hand screen shows dialog boxes and command windows through which she controls the stereoplotter software. Instead of red/blue glasses, the operator is wearing glasses with polarized lens filters that allow her to visualize a three-dimensional image of the terrain. She handles a 3-D mouse that allows her to place a cursor on the terrain image within inches of its actual horizontal and vertical position.

    Operator compiling data from stereoscopic aerial images using photogrammtric workstation

    Merri MacKay (graduate of the Penn State Certificate Program in GIS, and employee of BAE Systems ADR), uses an analytic stereoplotter to digitize vertical and horizontal positions from a stereoscopic model. Photo circa 1998, used with permission of Ms. MacKay and ADR, Inc. When she encountered her picture as a student in the class in 2004, Merri wrote “I’ve got short hair and four grandkids now…”

    6.15. Orthorectification

    An orthoimage (or orthophoto) is a single aerial image in which distortions caused by relief displacement have been removed. The scale of an orthoimage is uniform. Like a planimetrically correct map, orthoimages depict scenes as though every point were viewed simultaneously from directly above. In other words, as if every optical axis were orthogonal to the ground surface. Notice how the power line clearing has been straightened in the orthophoto on the right below.

    Comparison of unrectified vertical aerial image and orthoimage of same scene

    Comparison of a vertical aerial photograph (left) and an orthophoto.

    Relief displacement is caused by differences in elevation. If the elevation of the terrain surface is known throughout a scene, the geometric distortion it causes can be rectified. Since photogrammetry can be used to measure vertical as well as horizontal positions, it can be used to create a collection of vertical positions called a terrain model. Automated procedures for transforming vertical aerial photos into orthophotos require digital terrain models.

    Since the early 1990s, orthophotos have been commonly used as sources for editing and revising of digital vector data.

    6.16. Metadata

    Through the remainder of this Chapter and the next we’ll investigate the particular data products that comprise the framework themes of the U.S. National Spatial Data Infrastructure (NSDI). The format I’ll use to discuss these data products reflects the Federal Geographic Data Committee’sMetadata standard (FGDC, 1998c). Metadata is data about data. It is used to document the content, quality, format, ownership, and lineage of individual data sets. As the FGDC likes to point out, the most familiar example of metadata is the “Nutrition Facts” panel printed on food and drink labels in the U.S. Metadata also provides the keywords needed to search for available data in specialized clearinghouses and in the World Wide Web.

    Some of the key headings included in the FGDC metadata standard include:

    1. Identification Information: Who created the data, a brief description of its content, form, and purpose; its status, spatial extent, and use restrictions;
    2. Data Quality Information: Accuracy and completeness of attributes, horizontal and vertical positions, sources, and procedures used to create the data;
    3. Spatial Reference Information: Projection and/or coordinate system; datum and ellipsoid;
    4. Entity and Attribute Information: Feature and attribute categories used; and
    5. Distribution Information: Availability, and how to acquire the data.

    FGDC’s Content Standard for Digital Geospatial Metadata is published here. Geospatial professionals understand the value of metadata, know how to find it, and how to interpret it.

    6.17. Digital Orthophoto Quadrangle (DOQ)

    IDENTIFICATION

    Digital Orthophoto Quads (DOQs) are raster images of rectified aerial photographs. They are widely used as sources for editing and revising vector topographic data. For example, the vector roads data maintained by businesses like NAVTEQ and Tele Atlas, as well as local and state government agencies, can be plotted over DOQs then edited to reflect changes shown in the orthoimage.

    Most DOQs are produced by electronically scanning, then rectifying, black-and-white vertical aerial photographs. DOQ may also be produced from natural-color or near-infrared false-color photos, however, and from digital imagery. The variations in photo scale caused by relief displacement in the original images are removed by warping the image to compensate for the terrain elevations within the scene. Like USGS topographic maps, scale is uniform across each DOQ.

    Most DOQs covers 3.75′ of longitude by 3.75′ of latitude. A set of four DOQs corresponds to each 7.5′ quadrangle. (For this reason, DOQs are sometimes called DOQQs–Digital Orthophoto Quarter Quadrangles.) For its National Map, USGS has edge-matched DOQs into seamless data layers, by year of acquisition.

    Portion of a USGS Digital Orthophoto Quadrangle

    Portion of a USGS Digital Orthophoto Quad (DOQ) for Bushkill, PA.

    DATA QUALITY

    Like other USGS data products, DOQs conform to National Map Accuracy Standards. Since the scale of the series is 1:12,000, the standards warrant that 90 percent of well-defined points appear within 33.3 feet (10.1 meters) of their actual positions. One of the main sources of error is the rectification process, during which the image is warped such that each of a minimum of 3 control points matches its known location.

    SPATIAL REFERENCE INFORMATION

    All DOQs are cast on the Universal Transverse Mercator projection used in the local UTM zone. Horizontal positions are specified relative to the North American Datum of 1983, which is based on the GRS 80 ellipsoid.

    ENTITIES AND ATTRIBUTES

    The fundamental geometric element of a DOQ is the picture element (pixel). Each pixel in a DOQ corresponds to one square meter on the ground. Pixels in black-and-white DOQs are associated with a single attribute: a number from 0 to 255, where 0 stands for black, 255 stands for white, and the numbers in between represent levels of gray.

    DOQs exceed the scanned topographic maps shown in Digital Raster Graphics (DRGs) in both pixel resolution and attribute resolution. DOQs are therefore much larger files than DRGs. Even though an individual DOQ file covers only one-quarter of the area of a topographic quadrangle (3.75 minutes square), it requires up to 55 Mb of digital storage. Because they cover only 25 percent of the area of topographic quadrangles, DOQs are also known as Digital Orthophoto Quarter Quadrangles (DOQQs).

    DISTRIBUTION

    USGS DOQ files are in the public domain, and can be used for any purpose without restriction. They are available for free download from the USGS, or from various state and regional data clearinghouses as well as from the geoCOMMUNITY site. Digital orthoimagery data at 1-foot and 1-meter spatial resolution, collected from multiple sources, are available for user-specified areas from the National Map Viewer site, and even higer resolution imagery (HRO) for certain areas is available through the USGS Seamless Data Warehouse site.

    To investigate DOQ data in greater depth, including links to a complete sample metadata document, visit Birthplace of the DOQ. You’re also welcome to post a comment to this page to describe your source of DOQ data, and how you use it. FGDC’s Content Standard for Digital Orthoimagery is published here.

    TRY THIS!

    EXPLORE DOQS WITH GLOBAL MAPPER (DLGV32 PRO)

    Now it’s time to use Global Mapper (dlgv32 Pro) again, this time to investigate the characteristics of a set of USGS Digital Orthophoto (Quarter) Quadrangles. The instructions below assume that you have already installed the Global Mapper / dlgv32 Pro software on your computer. (If you haven’t, return to installation instructions presented earlier in Chapter 6).

    Note: Global Mapper is a Windows application and will not run under the Macintosh operating system. The questions asked of Penn State students that involve the use of Global Mapper are not graded.

    1. First download one or more DOQ data archives. Each compressed DOQ is over 37 Mb in size and will take about 8 minutes to download via high speed DSL or cable, or over two hours via 56 Kbps modem.
    2. Next decompress each archive into a directory on your hard disk.
      • Open an archive (e.g., “DOQ_nw.zip”).
      • Create a subdirectory called “DOQ” within the directory you are using for class work.
      • Extract all files in the ZIP archive into your new subdirectory.

      If you download and extract all four ZIP archives, the end result will be four DOQs that correspond with the Bushkill, PA quadrangle.

    3. Launch Global Mapper (dlgv32 Pro).
    4. Open a Digital Orthophoto (Quarter) Quadrangle by choosing File > Open Data File(s)…, then navigate to the subdirectory into which you extracted the DOQ data, then open the file ‘bushkill_pa_nw.tif‘.
    5. The trial version of Global Mapper allows you to open and view up to four files at once. Note that you can turn layers on and off, and even adjust their transparency at Tools > Control Center. You might find it interesting to open and compare the DOQ and DRG layers.
    6. Use the Zoom and Pan tools to magnify and scroll across the DOQ. The “Full View” button (house icon) refreshes the initial full view of the dataset.
    7. To view an excerpt of the DOQ metadata, navigate to Tools > Control Center, then click the Metadata button.

    TRY THIS!

    ASSESS THE AVAILABILITY OF DIGITAL ORTHOIMAGERY VIA THE USGS NATIONAL MAP VIEWER

    The National Map Viewer is an Internet Map Server application that provides a browsable map interface to the digital data layers that make up the National Map. The orthoimagery available through this interface has been gathered from several sources in addition to the USGS DOQ collection describe above.

    1. On the National Map home page, expand the Products and Services list and follow the link to National Map Viewers page. This page lists recommended browsers and lets you know that you need the Flash Player in order to use the interface. You are apt to have the Flash Player already installed. Go ahead and follow the Click here to open viewer link. This will open the viewer in a new browser tab or window. After the application loads, maximize your browser window.The Help link in the upper right of the interface gives you access to a wealth of information about the viewable data as well as user guides.Basic map navigation tools are found on a bar at the top of the map display area, along with a vertical scale change bar.
    2. With the Overlays tab selected, on the left, and the Content sub-tab selected, check the box for the Imagery list and expand it. Check both boxes for 1_foot and 1_meter_imagery_outlines to see the areal extent of both categories depicted on the map. Take note of the distribution of the two resolutions. You might speculate on the reasons behind the coverage extents of the 1_foot imagery.
    3. You can view the actual 1_meter_imagery, too, by checking the box for it. Go ahead and investigate that.
    4. Open the Help window, under the Orthoimagery entry, and read about the sources drawn from to create the bank of orthoimagery available.

    PRACTICE QUIZ

    Registered Penn State students should return now to the Chapter 6 folder in ANGEL (via the Resources menu to the left) to take a self-assessment quiz about Photogrammetry. You may take practice quizzes as many times as you wish. They are not scored and do not affect your grade in any way.

    6.18. Summary

    Many local, state and federal government agencies produce and rely upon geographic data to support their day-to-day operations. The National Spatial Data Infrastructure (NSDI) is meant to foster cooperation among agencies to reduce costs and increase the quality and availability of public data in the U.S. The key components of NSDI include standards, metadata, data, a clearinghouse for data dissemination, and partnerships. The seven framework data themes have been described as “the data backbone of the NSDI” (FGDC, 1997, p. v). This chapter and the next review the origins, characteristics and status of the framework themes. In comparison with some other developed countries, framework data are fragmentary in the U.S., largely because mapping activities at various levels of government remain inadequately coordinated.

    Chapter 6 considers two of the seven framework themes: geodetic control and orthoimagery. It discusses the impact of high-accuracy satellite positioning on accuracy standards for the National Spatial Reference System–the U.S.’ horizontal and vertical control networks. The chapter stresses the fact that much framework data is derived, directly or indirectly, from aerial imagery. Geospatial professionals understand how photogrammetrists compile planimetrically-correct vector data by stereoscopic analysis of aerial imagery. They also understand how orthoimages are produced and used to help keep vector data current, among other uses.

    The most ambitious attempt to implement a nationwide collection of framework data is the USGS’ National Map. Composed of some of the digital data products described in this chapter and those that follow, the proposed National Map is to include high resolution (1 m) digital orthoimagery, variable resolution (10-30 m) digital elevation data, vector transportation, hydrography, and boundaries, medium resolution (30 m) land characterization data derived from satellite imagery, and geographic names. These data are to be seamless (unlike the more than 50,000 sheets that comprise the 7.5-minute topographic quadrangle series) and continuously updated. Meanwhile, in 2005, USGS announced that two of its three National Mapping Centers (in Reston, Virginia and Rolla, Missouri) would be closed, and over 300 jobs eliminated. Although funding for the Rolla center was subsequently restored by Congress, it remains to be seen whether USGS will be sufficiently resourced to fulfill its quest for a National Map.

    QUIZ

    Registered Penn State students should return now to the Chapter 6 folder in ANGEL (via the Resources menu to the left) to access the graded quiz for this chapter. This one counts. You may take graded quizzes only once.

    The purpose of the quiz is to ensure that you have studied the text closely, that you have mastered the practice activities, and that you have fulfilled the chapter’s learning objectives. You are welcome to review the chapter during the quiz.

    Once you have submitted the quiz and posted any questions you may have to either our discussion forums or chapter pages, you will have completed Chapter 6.

    COMMENTS AND QUESTIONS

    Registered students are welcome to post comments, questions, and replies to questions about the text. Particularly welcome are anecdotes that relate the chapter text to your personal or professional experience. In addition, there are discussion forums available in the ANGEL course management system for comments and questions about topics that you may not wish to share with the whole world.

    To post a comment, scroll down to the text box under “Post new comment” and begin typing in the text box, or you can choose to reply to an existing thread. When you are finished typing, click on either the “Preview” or “Save” button (Save will actually submit your comment). Once your comment is posted, you will be able to edit or delete it as needed. In addition, you will be able to reply to other posts at any time.

    Note: the first few words of each comment become its “title” in the thread.

    6.19. Bibliography

    Anson, A. (2002) Topographic mapping with plane table and alidade in the 1940s. [CD-ROM] Professional Surveyors Publishing Co.

    Doyle, David R. 1994 Development of the national spatial reference system. Retrieved 9 November 2007 from http://www.ngs.noaa.gov/PUBS_LIB/develop_NSRS.html

    Federal Geodetic Control Committee (1988). Geometric geodetic accuracy standards and specifications for using GPS relative positioning techniques. Retrieved March 27, 2013, fromdocs.lib.noaa.gov/noaa_documents/NOS/NGS/Geom_Geod_Accu_Standards.pdf

    Federal Geographic Data Committee (1998a). Geospatial positing accuracy standards part 2: standards for geodetic networks. Retrieved February 11, 2008, fromhttp://www.fgdc.gov/standards/standards_publications/

    Federal Geographic Data Committee (1998b). Geospatial positing accuracy standards part 1: reporting methodology. Retrieved February 11, 2008, from http://www.fgdc.gov/standards/standards_publications/

    Federal Geographic Data Committee (1998c). Content standard for digital geospatial metadata. Retrieved February 19, 2008, from http://www.fgdc.gov/standards/standards_publications/

    Gidon, P. (2006). Alpes_stereo. Retrieved May 10, 2006, fromperso.infonie.fr/alpes_stereo/i_index.htm (Expired link.)

    Masser, I. (1998). Governments and geographic information. London: Taylor & Francis.

    Moore, Larry (2000) The U.S. Geological Survey’s revision program for 7.5-Minute topographic maps. Retrieved December 14, 2007 from http://pubs.usgs.gov/of/2000/of00-325/moore.html

    National Aeronautic and Space Administration (1997). Mars pathfinder. Retrieved June 7, 2006, fromhttp://mars.jpl.nasa.gov/MPF/index0.html

    National Geodetic Survey (2007). The National Geodetic Survey 10 year plan; mission, vision and strategy 2007-2017. Retrieved February 19, 2008 from www.ngs.noaa.gov/INFO/ngs_tenyearplan.pdf

    National Oceanic and Atmospheric Administration (2007) NOAA history. Retrieved February 18, 2008, from http://www.history.noaa.gov/

    National Research Council (2002). Research opportunities in geography at the U.S. Geological Survey.Washington DC: National Academies Press.

    National Research Council (2007). A research agenda for geographic information science at the United States Geological Survey. Washington DC: National Academies Press.

    Office of Management and Budget (1990) Circular A-16, revised. Retrieved February 19, 2008, fromhttp://www.whitehouse.gov/omb/circulars_a016_rev

    Parry, R.B. (1987). The state of world mapping. In R. Parry & C. Perkins (Eds.), World mapping today. Butterworth-Heinemann.

    Robinson, A. et al. (1995). Elements of cartography (5th ed.). New York: John Wiley & Sons.

    Thompson, M. M. (1988). Maps for America, cartographic products of the U.S. geological survey and others (3d ed.). Reston, Va.: U.S. Geological Survey.

    United States Geological Survey (2001). The National Map: topographic mapping for the 21st century.Final Report, November 30. Retrieved 11 January 2008 fromhttp://nationalmap.gov/report/national_map_report_final.pdf

    White House (1994) Executive order 12906: coordinating geographic data access. Retrieved February 19, 2008, from http://www.fgdc.gov/policyandplanning/executive_order


    This page titled 6: National Spatial Data Infrastructure I is shared under a CC BY-NC-SA 3.0 license and was authored, remixed, and/or curated by David DiBiase et al..

    • Was this article helpful?